Arrow

Flange Mount 50mm Range

The 2000w model is suitable for 150L and 200L geysers. 

Xtend Elements are extremely efficient and a smaller size element can be used to obtain the same temperature and volume of hot water in the same time as a larger resistive element.

It is essential that the thermostat is set to at least 10 degrees less than it was set to with a standard resistive element.

If a standard element was set to 60 degrees then set the Xtend Element to 50 degrees.

The Xtend Element, by design, will return the same average temperature even though the thermostat is set lower.

Please refer to the installation / warranty booklet for correct positioning of the element and flange and other important installation steps.

Arrow  Flange Mount 50mm Range

The 2000w model is suitable for 150L and 200L geysers. 

Xtend Elements are extremely efficient and a smaller size element can be used to obtain the same temperature and volume of hot water in the same time as a larger resistive element.

It is essential that the thermostat is set to at least 10 degrees less than it was set to with a standard resistive element.

If a standard element was set to 60 degrees then set the Xtend Element to 50 degrees.

The Xtend Element, by design, will return the same average temperature even though the thermostat is set lower.

Please refer to the installation / warranty booklet for correct positioning of the element and flange and other important installation steps.

Arrow

Screw-in 35mm Range

The 3000w model is suitable for 200L and 250L geysers as well as multi-element bulk water heaters and jacuzzi’s.

Xtend Elements are extremely efficient and a smaller size element can be used to obtain the same temperature and volume of hot water in the same time as a larger resistive element.

It is essential that the thermostat is set to at least 10 degrees less than it was set to with a standard resistive element.

If a standard element was set to 60 degrees then set the Xtend Element to 50 degrees.

The Xtend Element, by design, will return the same average temperature even though the thermostat is set lower.

Please refer to the installation / warranty booklet for correct positioning of the element and flange and other important installation steps.

Arrow  Screw-in 35mm Range

The 3000w model is suitable for 200L and 250L geysers as well as multi-element bulk water heaters and jacuzzi’s.

Xtend Elements are extremely efficient and a smaller size element can be used to obtain the same temperature and volume of hot water in the same time as a larger resistive element.

It is essential that the thermostat is set to at least 10 degrees less than it was set to with a standard resistive element.

If a standard element was set to 60 degrees then set the Xtend Element to 50 degrees.

The Xtend Element, by design, will return the same average temperature even though the thermostat is set lower.

Please refer to the installation / warranty booklet for correct positioning of the element and flange and other important installation steps.

3-YEAR WARRANTY

120 Degrees (Pty) Ltd warrants our Xtend PTC heating element against manufacturing defects for three years from date of the purchase. There are specific actions that must be followed in order for the warranty to be valid. These include retaining your original invoice from purchase as well as installing our Xtend PTC heating element in accordance with the installation instructions provided by ourselves. There are additional exclusions to our warranty which are set out in detail on this webpage. If you submit a valid claim under this warranty, we will either repair, replace or refund our Xtend PTC heating element at our own discretion. Warranty benefits are in addition to rights provided under local consumer laws.

  Download full warranty here